Application Guide: Broom Finished Precast.

Apply While in Mould or After Removing From The Mould.

Cure your precast by finishing the product into the surface while it’s still in the mould, or after removing it from its mould.

Great for broom finished surfaces where water curing can damage or discolour the surface.

Apply either during the finishing process, after removing from the mould, or both. – The best application point is the one most convenient for you!


How To Apply on Precast Stairs.

To get a trowel aid and cure in one step, just apply Protec III: Original at 350 square feet per US gallon/8.6 liters per square meter (Estimated cost: 5.7¢ per square foot/61¢ per square meter) before floating the surface, fully work and trowel in the product, then proceed to finish like normal.

If your stairs are partially in the mould while finishing, then apply at 350 square feet per US gallon/8.6 liters per square meter (Estimated cost: 5.7¢ per square foot/61¢ per square meter) after fully removing from the mould, making sure that the concrete has fully dried before applying if you wash the stairs during production.

With Protec III: Original the surface can be cured without damaging your broom finished surface, and you will not need to water cure anymore.

Application Guide: Broom Finished Concrete.

Get More Cream, Prevent Flashing, and Get a Full 28-Day Cure.

Applying Protec III: Original on broom finished concrete is as simple as it gets.

Simply apply the product with a sprayer at 300 square feet per US gallon/7.4 liters per square meter (Estimated cost: 6.7¢ per square foot/72¢ per square meter) across the entire surface after screeding. For larger pours, apply after you screed each section. Once applied, immediately work all product in with 2-3 passes of your concrete float.

Give fast-drying areas a light spray, then fully work all product in.

Add Resistance with a Second Coat.

Add Salt and Chemical Resistance, Plus Reduce Spalling and Popping.

Multiple coats on broom finished concrete is for reducing surface issues from salts, if that's your goal, then apply two coats of Protec III: Original at 200 square feet per US gallon/4.9 litres per square meter (Estimated cost: 10¢ per square foot/$1.07 per square meter) per coat when the concrete is not abnormally hot.

Allow the concrete to return to its original colour between each coat, spread out any puddles if they remain after 10 minutes.

Anything sprayed on newly broomed concrete will not soak in, wait at least until the next day.

Application Guide: Slipform Concrete.

Reliable Workability and Curing In One Product.

With Protec III: Original you can simplify your finishing and cure application into one step, letting you do larger pours in almost any conditions.

After you've gotten the final shape of your slipform concrete apply at 300 square feet per US gallon/7.4 litres per square meter (Estimated cost: 6.7¢ per square foot/72¢ per square meter), then work all product into the surface before continuing.

Give fast-drying areas a light spray, then fully work all product in.


Ready-To-Use — Complete Cure and Hardener Inside Your Trowel Aid.

Applying cures on slipform paving can quickly become difficult and unreliable.

With Protec III: Original you can simply apply one coat at 300 square feet per US gallon/7.4 litres per square meter (Estimated cost: 6.7¢ per square foot/72¢ per square meter) after placing your concrete, then work the product in with your concrete float to get a cure and hardener, that's it!

Come back later to broom the surface when its ready, and your application is complete!

After your concrete has cured, there is no more preparation needed before painting it.

Application Guide: Shotcrete and Gunite.

On-Demand Workability and Curing In One Product.

Take difficult sprayed concrete surfaces to smooth and workable with Protec III: Original.

After you've gotten the desired shape of your surface, simply spray product on at 300 square feet per US gallon/7.4 litres per square meter (Estimated cost: 6.7¢ per square foot/72¢ per square meter) before working all product into the concrete.

Give fast-drying areas a light spray, then fully work all product in.


Replace All Coatings, Water Curing, Troweling Aids, and Hardeners.

Cure impossible surfaces with a product that becomes part of the concrete.

When applied during finishing Protec III: Original will prevent surface cracking during your first day of curing, then when you come back the next day to apply a second coat at 300 square feet per US gallon/7.4 litres per square meter (Estimated cost: 6.7¢ per square foot/72¢ per square meter) you will get a full 28-day cure.

After your concrete has cured, there is no more preparation needed before painting it.